Ukraine, Kherson,
str. Rabochaya 82 a
+38 (050) 396 28 88
+38 (067) 552 64 77
Calculate the cost

Dredger HCC 2000/30-GR*

Performance on the ground:
405-1000 m3/h
Power supply:
self-contained
Depth development:
up to 10m
Methods of suction:
hydraulic washing-out
Order dredger
Description

Productivity оf the pulp: 2200-3000 m3/h.

Productivity оf the soil (hydraulic deposition of soil category 1-2): 250-500 m3/hour;   from 3000 m3 for the shift(8 hours).

Dimensions in working position: maximum length 22 m, maximum width 5.5 m, maximum height 3.8 m, board height 2.5 m, draft 0.8 m . Weight: 35 t.

The hydraulic dredger is equipped with an arrow. Suction pipe length is 9 m  with hydraulic washing-out (jet), with pump capacity 150 kW, the water supply is 200 m3 per hour with hydraulic drop of 100 m.

Power unit main: IVECO (capacity of 550 kW, 1900 rev /min, fuel consumption - 55 l/h).

Power unit: YAMZ-238 D1 (capacity of 275 kW, 1800 rev /min, fuel consumption - 22 l/h)

Fuel tanks capacity 7500 l.

The generator's own needs 100 kW.

Pump:  16'/14'-750-PET (made by VVV-SPETSTEKHNIKA). Pump specifications16 inch/14 inch, soil outlet from15% per hour, hydraulic drop of water column– 50 m, maximum capacity – 450 kW, rotation frequency – 750 rev./min. Hydraulic drive.

Technical characteristics of the pump (are provided geodetic lift is not more than 30 m for soil 1-2 category):
1. output up to 25% at the distance of transportation of pulp to 500 m (capacity 500 m3 of soil)
2. output up to 20% at the distance of transportation of pulp to 700 m (capacity 400 m3 of soil)
3. output up to 15% at the distance of transportation of pulp to 800 m (capacity 300 m3 of soil)
4. output up to 10% at the distance of transportation of pulp to 900 m (capacity 200 m3 of soil)
Dredger this modification lifts the soil with water depth 1 - 7 m, pushing through slurry pipeline 900 m geodesic a slope of not more than 30 m.

Control Room is equipped with:

  • gauges (gauge, ammeter, frequency meter, pressure gauge (on the soil pump discharge nozzle, on the nozzle to wash the seal on the pipe hydrowashout));
  •  remote control  of  dredger movement;
  •  emergency shutdown system for dredger's network;
  • observation devices for main engine.

For lighting on the dredger used two-wire isolated power distribution system voltage of 220V, 50 Hz.
For mains used a three-phase isolated power distribution system 380V, 50Hz.
For networks of control and signaling, as well as emergency lighting used two-wire isolated power distribution system voltage 24V DC.

Energy supply: self-contained.

The movement of hydraulic dredger is performed with the help of 4 winches with the capacity of 5.5 kW. Ladder winch - 7.5 kW, tracing force 7.5 t.

Pipeline diameter 400-550 mm

The enterprise guarantees the operation of the equipment for 1 year or 1800 Moto hours.

Maximum term of manufacturing is 6 months. 

Power of main engine may vary, depending on the distance of transportation of the pulp   and requirements for operation.

dredger MARKED " * "  mean that possible to install the main engine brands CAT (USA production)

For the selection of a more suitable dredger to your requirements, please fill in the questionnaire, because depth of development and attachments of the dredger may vary slightly.

Завод ВВВ Спецтехника, Украина
Для просмотра сайта, обновите версию вашего браузера!