Ukraine, Kherson,
str. Rabochaya 82 a
+38 (050) 396 28 88
+38 (067) 552 64 77
Calculate the cost

Dredger HCC 12000/60-K-GR

Performance on the ground:
1005-3000 m3/h
Power supply:
Depth development:
up to 22m
Methods of suction:
hydraulic washing-out
Order dredger

Productivity оf the pulp: 12000-15000 m3/h.

Productivity оf the soil (hydraulic deposition of soil category 1-2): 1500-4000 m3/hour;   from 15000 m3 for the shift(8 hours).

Dimensions in working position: maximum length 48 m, maximum width 9.5 m, maximum height 6.5 m, board height 3.3 m, draft 1.0 m . Weight: 140 t.

The hydraulic dredger is equipped with an arrow. Suction pipe length is 22 m, diameter 800 mm,  with   hydraulic washing-out (jet), with pump capacity 500 kW, the water supply is 550 m3 per hour with hydraulic drop of 150 m

Power unit main: CAT (capacity of 2700 kW, 1600 rev /min, fuel consumption - 650 l/h).

Power unit: CAT (capacity of 1000 kW, 1600 rev /min, fuel consumption - 230 l/h)

Fuel tanks capacity 35000 l.

The generator's own needs 750 kW.

Pump:  28'/24'-1850-W (made by VVV-SPETSTEKHNIKA). Pump specifications28 inch/24 inch, soil outlet from15% per hour, hydraulic drop of water column– 70 m, maximum capacity – 2500 kW, rotation frequency – 350 rev./min. Hydraulic drive.

Technical characteristics of the pump (are provided geodetic lift is not more than 30 m for soil 1-2 category):
1. output up to 25% at the distance of transportation of pulp to 1000 m (capacity 3000 m3 of soil)
2. output up to 20% at the distance of transportation of pulp to 1500 m (capacity 2500 m3 of soil)
3. output up to 15% at the distance of transportation of pulp to 2000 m (capacity 1800 m3 of soil)
4. output up to 10% at the distance of transportation of pulp to 3000 m (capacity 1200 m3 of soil)
Dredger this modification lifts the soil with water depth 1 - 18 m, pushing through slurry pipeline 3000 m geodesic a slope of not more than 30 m.

Control Room is equipped with:

  • gauges (gauge, ammeter, frequency meter, pressure gauge (on the soil pump discharge nozzle, on the nozzle to wash the seal on the pipe hydrowashout));
  •  remote control  of  dredger movement;
  •  emergency shutdown system for dredger's network;
  • observation devices for main engine.

For lighting on the dredger used two-wire isolated power distribution system voltage of 220V, 50 Hz.
For mains used a three-phase isolated power distribution system 380V, 50Hz.
For networks of control and signaling, as well as emergency lighting used two-wire isolated power distribution system voltage 24V DC.

Energy supply: self-contained.

The movement of hydraulic dredger is performed with the help of 4 winches with the capacity of 17 kW. Ladder winch - 25 kW, tracing force 7.5 t.

Pipeline diameter from 870 mm

The enterprise guarantees the operation of the equipment for 1 year or 1800 Moto hours.

Maximum term of manufacturing is 10 months. 

Power of main engine may vary, depending on the distance of transportation of the pulp   and requirements for operation.

For the selection of a more suitable dredger to your requirements, please fill in the questionnaire, because depth of development and attachments of the dredger may vary slightly.

Завод ВВВ Спецтехника, Украина
Для просмотра сайта, обновите версию вашего браузера!