Productivity оf the pulp: 400-500 m3/h.
Productivity оf the soil:
Dimensions in working position: maximum length 14 m, maximum width 4.4 m, maximum height 2.8 m, board height 1.1 m, draft 0.65 m . Weight: 15 t.
The hydraulic dredger is equipped with an arrow. Suction pipe length is 8 m with with cutter ripper, power 10 kW, frequency 30 rev/min, hydraulic drive.
Power unit: D-264 (capacity of 175 kW, 1800 rev /min, fuel consumption - 17 l/h) or equivalent.
Fuel tanks capacity 700 l.
The generator's own needs 28 kW.
Pump: 8'/6'-450-NS (made by VVV-SPETSTEKHNIKA). Pump specifications: 8 inch/6 inch, soil outlet from15% per hour, hydraulic drop of water column– 40 m, maximum capacity – 90 kWt, rotation frequency – 1000 rev./min. Hydraulic drive.
Technical characteristics of the pump (are provided geodetic lift is not more than 10 m for soil 1-2 category):
1. output up to 25% at the distance of transportation of pulp to 150 m (capacity 80 m3 of soil)
2. output up to 20% at the distance of transportation of pulp to 300 m (capacity 70 m3 of soil)
3. output up to 15% at the distance of transportation of pulp to 450 m (capacity 60 m3 of soil)
4. output up to 10% at the distance of transportation of pulp to 600 m (capacity 50 m3 of soil)
Dredge this modification lifts the soil with water depth 0.5 - 6 m, pushing through slurry pipeline 600 m geodesic a slope of not more than 10 m.
Control Room is equipped with:
For lighting on the dredger used two-wire isolated power distribution system voltage of 220V, 50 Hz.
For mains used a three-phase isolated power distribution system 380V, 50Hz.
For networks of control and signaling, as well as emergency lighting used two-wire isolated power distribution system voltage 24V DC.
Energy supply: self-contained.
The movement of hydraulic dredger is performed with the help of 4 winches with the capacity of 2.2 kW. Ladder winch - 2.2 kW, tracing force 3.5 t.
Pipeline diameter 160 mm
The enterprise guarantees the operation of the equipment for 1 year or 1800 Moto hours.
Maximum term of manufacturing is 3.5 months.
For the selection of pipeline, please fill in the questionnaire because diameter slurry pipeline depends on the length of pulp conveying distance.